Can You Remove Thc From CBD Oil

CBDISTILLERY

Buy CBD Oil Online

THC Removal – Remove THC from CBD | B/R Instrument Blog | Industry Leader in Laboratory Distillation Equipment Cases of CBD oil users failing drug tests are on the rise. Learn more about why this happens and how to avoid it. How to extract CBD oil – The extraction process & how to make CBD oil CBD (Cannabidiol) is a compound that has shown promise in a variety of medical applications, like relief from pain and

THC Removal – Remove THC from CBD

Consumers are attracted to the purported health benefits of CBD but understand that THC naturally occurs in hemp along with other minor cannabinoids. They do not want to consume THC because they don’t want the “high” the comes along with THC or they don’t want to possibly test positive for THC in a work drug screening. The good news is that THC can be separated from CBD so that it can be consumed without concern for unwanted THC.

There are several ways to remove THC from CBD oil, CBD extracts and CBD distillate. The products can be THC Free (T Free) or low THC (0.3% or lower) which does not produce a “high”.

Broad Spectrum CBD

Broad spectrum products contain all of the cannabinoids with little THC (less than 0.3%/wt). This should not to be confused with THC Free or T-Free oil which contains no THC.

Chromatographic methods such as flash chromatography and CPC use solvents and a stationary phase to fractionate the cannabinoids from one another. In these processes, the THC is isolated and removed from the other cannabinoids. But, there is the unwanted side effect of losing some or all of the minor cannabinoids and CBD in the THC fraction.

In addition to using large volumes of solvents, chromatographic methods remove THC at a fairly slow rate and some CBD is lost in the process. At the same time, it requires an experienced operator to be available at all times during operation.

SCB-15 THC Remediation System

SCB-15 – Solvent Free THC Remediation System

Another technique for removing THC from full spectrum CBD is the SBC solvent free remediation system. This THC removal process is solvent free. It uses automation to maintain the optimum vacuum, temperature, and other parameters to remove THC (and some CBD) from the CBD oil. An operator occasionally monitors the THC level by Near Infrared or HPLC. Up to 100 liters of CBD or CBG oil can be remediated in 12-24 hours.

Pure CBD

Pure CBD (also called isolate) can be produced by crystallizing CBD oil/extract/distillate. CBD oil is mixed with pentane and cooled until the CBD crystallizes (crashes out). Crystallized CBD is filtered, rinsed, and dried. Purities of 99+% are possible. Re-crystallization can increase the purity even higher. All THC is removed along with minor cannabinoids.

CBD Crystals or “Isolate”

Full spectrum CBD

The “entourage effect” is the name given to the synergistic benefits of cannabinoids and terpenes working together in your body. It has been the subject of study for many years, however we are still only beginning to understand some of the possibilities. The entourage effect can produce many different results depending on the combinations.

Full spectrum is a term that applies to extracts or oils that contain all of the naturally occurring cannabinoids from the plant. For hemp products this often includes more than 0.3% THC. In order to stay legally compliant, something must remove the THC.

4 Comments

this is what i want to start doing as my income resource i want to learn everything i can about how this is done and if i need to attend a class or school to get the right training if you would please send me some information on what i should be doing in order to start the process would really be great thanks very much for your time ———————————- scott

Does CBD Show Up On a Drug Test?

Sherry Christiansen is a medical writer with a healthcare background. She has worked in the hospital setting and collaborated on Alzheimer’s research.

Verywell Health articles are reviewed by board-certified physicians and healthcare professionals. These medical reviewers confirm the content is thorough and accurate, reflecting the latest evidence-based research. Content is reviewed before publication and upon substantial updates. Learn more.

Femi Aremu, PharmD, is a professional pharmacist with experience in clinical and community pharmacy. He currently practices in Chicago, Illinois.

Despite the fact that cannabidiol (CBD) is derived from cannabis—the same type of plant that marijuana comes from—CBD should not show up on a drug test. That said, it is possible.

Drug tests check for tetrahydrocannabinol (THC) because that is the cannabis compound that makes people feel high. CBD products are typically THC-free.

However, CBD products can contain 0.3% of THC by law. In some people, that may be enough to yield a positive drug test result.

This article explains why CBD products may show up on a drug test as THC. It also details what to look for in CBD products so you can prevent a positive drug test.

Does CBD Oil Contain THC?

The active chemical in marijuana that gets detected in a positive drug test screening is THC. Most people are under the impression that CBD oil is THC-free, which is generally true. But not always.

As it turns out, depending on the source of the cannabis that is used to produce the CBD oil, some products do contain traces of THC. This includes low-quality isolates and many full-spectrum tinctures. A full spectrum oil contains other active plant compounds in addition to CBD.

See also  Can You Take CBD Oil On An Empty Stomach

Cannabis Types

Cannabis is the umbrella term describing hemp and marijuana plants—two different varieties of the Cannabis genus. Both marijuana and hemp can be described as cannabis, but they are two different plants.

CBD is one of many active chemical compounds in cannabis plants. One reason it’s becoming more popular is that it’s said to lack THC.

The primary difference between hemp and marijuana is that hemp is nearly void of THC. In fact, a cannabis strain must contain less than 0.3% THC to be classified as hemp. This is why hemp can be legally sold in various products.

Most CBD products are made from hemp, not marijuana.

There are many distinctions between marijuana and hemp that relate to CBD oil. Marijuana contains both THC (the “high”-inducing element) and CBD. Hemp contains CBD and only trace amounts of THC.

Hemp also contains many cannabinoids, which is a name for the compounds found in cannabis. CBD is only one example.

There are several techniques for extracting CBD oil from the cannabis plant. The extraction method determines whether the CBD oil is an “isolate” or a “full-spectrum oil.”

A CBD isolate is a pure compound with no other active compounds or cannabinoids. The full-spectrum compounds may include other active chemicals, such as cannabinol and cannabis terpenes (the part of the plant that gives the plant its aroma).

Study of CBD Oil

While some CBD oils claim to be isolates, they may be full-spectrum oils and actually contain more cannabinoids (such as THC) than they claim.

A study conducted at the internationally known Lautenberg Center For Immunology and Cancer found that CBD was more effective at treating inflammation and pain when used with other cannabis plant compounds.

These compounds were derived from a full-spectrum product rather than a CBD isolate product alone. This is one reason that full-spectrum products (those containing THC) are popular.

However, the distinction between full-spectrum oils and isolates makes all the difference if you are being tested for drug use.

Reasons for Failing a CBD Drug Test

There are several common reasons a person can test positive for THC after taking CBD.

Using Product With THC

The most common reason for a failed CBD drug test is that a person is using a CBD oil product that contains THC. This may be a full-spectrum product. Sometimes, though, it could be a low-quality isolate product that contains a small amount of THC.

Although most manufacturers claim their products do not contain THC, this is not always the case.

Cross-Contamination of THC

Very small amounts of THC present in the material that CBD is extracted from can get into the CBD oil in high enough amounts to result in a positive drug test. This scenario may be more likely to occur when CBD oil is purchased from cannabis dispensaries in places where cannabis is legal.

Mislabeling of Products

CBD oil extracted from hemp is not supposed to contain more than 0.3% THC. However, it’s not uncommon for sellers to mislabel their products as THC-free hemp when, in reality, it’s a low-quality oil extracted from marijuana. And marijuana does contain THC.

In fact, one study discovered that almost 70% of the CBD products sold online were mislabeled. This caused “potential serious harm to its consumers.” The reason for this widespread mislabeling is that CBD products are not strictly regulated by the Food and Drug Administration (FDA).

Secondhand Exposure to THC

Inadvertent exposure to marijuana (via secondhand smoke) is unlikely to be enough for a person to get a positive drug test result. But it is possible. Being in a room with heavy pot smokers for several hours may cause the inhalation of enough THC-containing smoke to result in a positive test result.

A more likely secondhand exposure scenario is a positive marijuana hair test. This results from direct contact with marijuana paraphernalia or from another person having THC on their hands.

For instance, say that someone who had direct contact with marijuana then touched your hair. You could feasibly receive a false positive on a drug screening that tests your hair.

CBD Oil Breakdown in the Digestive System

Some sources report that in rare cases, false positive test results have come from CBD oil that breaks down into very small amounts of THC in the stomach. Other studies, however, have refuted this finding.

The conclusion is that it’s still theoretically possible for traces of THC to be present in stomach acid when “less-purified CBD productions” are ingested.

How to Avoid a Positive CBD Drug Test

If you take CBD oil, you can take steps to try to prevent failing a drug test:

  • Do thorough research to ensure the CBD product you’re using is pure and that the company is legitimate.
  • Look for manufacturers that have been accredited by the Better Business Bureau.
  • Ensure that the CBD oil is an isolate product extracted from a viable industrial hemp supply. It should not be a low-quality tincture.
  • Ask questions about product processing techniques and the possibility of cross-contamination.
  • Avoid secondhand exposure to marijuana use via pot smoking or hair contact from THC users.

Summary

CBD oil is usually marketed as THC-free, but that’s not always the case. Full-spectrum CBD oils contain other cannabinoids, which may include THC. Isolate products may be contaminated with THC, as well.

See also  CBD Gummies Kansas City

You have to be proactive to avoid failing a drug test if you’re taking CBD oil. Most important: Ensure that you’re using a pure product made by a reputable company.

A Word From Verywell

In theory, getting a false positive on a drug test from CBD oil should be relatively impossible from pure CBD oil containing less than 0.3% THC. However, because CBD oil is not well regulated, there is no guarantee that a product contains pure CBD oil or that its concentration is safe or effective.

Use the utmost caution and do your research when purchasing a quality CBD oil product to ensure its purity, especially if you need to undergo a drug screening.

Frequently Asked Questions

Drug tests look for tetrahydrocannabinol (THC), which is the element in marijuana that causes a high. CBD oils can have trace amounts of THC even if they’re labeled “THC-free.”

Yes. If the products contain THC, you could test positive. If you know you’ll need to take a drug test, avoid full-spectrum CBD products that may contain small amounts of THC. Be sure you purchase products from a reliable source. And be wary of online retailers; researchers have found that 21% of online CBD and hemp products were mislabeled.

Drug tests do not typically measure CBD. Most tests check for THC, the psychoactive component in marijuana. Depending on the frequency of use, THC can be picked up on a test anywhere from a few days for a single use or over a month for heavy daily pot smokers.

CBD edibles take about 30 to 60 minutes to start to take effect. They last five to six hours, depending on your metabolism and dose. A CBD edible may show up on a drug test as THC metabolites for three days. However, if you frequently take CBD edibles, it can take up to 15 days to have a clean urine test.

The FDA strongly advises against taking CBD or THC products while nursing. Cannabis products can be excreted through breastmilk and are not safe for the baby. Cannabinoids can stay in your milk for up to six days, so “pumping and dumping” may not be a good option.

Verywell Health uses only high-quality sources, including peer-reviewed studies, to support the facts within our articles. Read our editorial process to learn more about how we fact-check and keep our content accurate, reliable, and trustworthy.

Huestis MA. Human cannabinoid pharmacokinetics. Chem Biodivers. 2007;4(8):1770-804. doi:10.1002/cbdv.200790152

Nahler G, Grotenhermen F, Zuardi AW, Crippa JAS. A conversion of oral cannabidiol to Delta9-Tetrahydrocannabinol seems not to occur in humans. Cannabis Cannabinoid Res. 2017;2(1):81-86. doi:10.1089/can.2017.0009

Bonn-Miller MO, Loflin MJE, Thomas BF, Marcu JP, Hyke T, Vandrey R. Labeling accuracy of cannabidiol extracts sold online. JAMA. 2017;318(17):1708. doi:10.1001/jama.2017.11909

Crippa JA, Guimarães FS, Campos AC, Zuardi AW. Translational investigation of the therapeutic potential of cannabidiol (CBD): Toward a new age. Front Immunol. 2018;9:2009. Published 2018 Sep 21. doi:10.3389/fimmu.2018.02009

By Sherry Christiansen
Sherry Christiansen is a medical writer with a healthcare background. She has worked in the hospital setting and collaborated on Alzheimer’s research.

How to extract CBD oil – The extraction process & how to make CBD oil

CBD (Cannabidiol) is a compound that has shown promise in a variety of medical applications, like relief from pain and anxiety which are most common, along with many other ailments. A major benefit to CBD is that it doesn’t contain THC, which is the compound that makes users high, so this makes CBD an ideal product for children. Below you will find a step by step outline of how cbd oil is made.

CBD extract oil from cannabis or hemp.

There are many ways to extract the oil from the plant and make cbd oil. Apeks CO2 extraction systems use CO2 as a solvent to extract the oil. The solvent is considered a cleaner, purer form of extraction because there is no residue after extraction.

To isolate the individual compounds (CBD being one of them), the extracted oil needs to be distilled after extraction. The first step is a process called Winterization, followed by Short Path Distillation.

Winterization

Winterization is the process to remove undesirable elements that were extracted from the plant, for example fats, waxes, and lipids. This process is only needed when the oil was extracted at high pressure/high temperature (supercritical) because this intense extraction pulls everything from the plant, including material you don’t want in the final products. The extracted oil is effectively crude oil, which needs refining.

Once extracted, the mixture is combined with 200 proof alcohol and stirred vigorously until completely mixed. It’s then placed in a deep freezer overnight. In the morning, the mixture looks cloudy and is ready for filtration. One way to filter out the fats, etc. is to run it through a filter paper into an extraction jar. A common piece of equipment for this is a Buchner Funnel. Once it’s been filtered to satisfaction and the undesirable elements have been removed, it’s time to remove the alcohol. This is done using heat. The extraction is warmed and as its warmed, the alcohol evaporates since the boiling point of alcohol is lower than the oil. The removed alcohol may then be used on a different batch of crude oil.

Mixing oil and alcohol prior to freezing

Short Path Distillation equipment

Short Path Distillation

To further refine the CBD extract, and to isolate the CBD, the oil goes through Short Path Distillation. This works in much the same way as Winterization in that the extract is heated and each compound is then separated because each one has a different boiling point. In this way, each compound is isolated and can be used by itself.

See also  Cost Of CBD Gummies For Tinnitus

Benefits and Uses of CBD

Research is showing that CBD extract has a huge potential in the medical market. CBD’s common benefits are treating anxiety, reducing pain and inflammation, helping prevent seizures, among many others. Because it’s a natural extract, there are few, if any, side effects. The extract works with the body’s endocannabinoid system, which is the system’s method of regulating processes, like pain, mood, appetite, and memory. CBD works with the natural system rather than being an unnatural substance, so the body doesn’t try to reject it. CBD extract may be sourced from cannabis or hemp, most typically from hemp, which is naturally high in CBD. Cannabis can also be bred to have low THC levels and high CBD levels, but it’s possible that the THC will get concentrated and included in your final products.

Tne Entourage Effect

Despite the benefits of CBD as an isolate, there is much to be said for treating patients with all the compounds in the plant, not as separate isolates. Patients can still use the oil without getting high, as long as the THCa has not been heated, which converts it into THC, which is what makes you high. The Entourage Effect is the effect that all the compounds of the plant have on the body, as a whole.

Hemp and cannabis oil extraction processes and techniques.

Andy is on a panel of experts, answering questions from the community. We compiled a collection of questions and answers below, about hemp and cannabis oil extraction processes and techniques.

Click here to get more information on the CBD Extraction Process.

What are the safest and most effective ways to extract and produce CBD-rich cannabis oil? CO2, oil, or ethanol?

Question:
What are the safest and the most effective ways to extract and produce CBD oil? CO2, oil, or ethanol?

Answer:
Thanks for the great question! There are really 2 questions here, so I’ll try to answer them separately.

First question: What are the safest ways to extract? When it comes to extraction, safety is an important issue and has many areas to consider. The list below represents some of the major areas that need to be addressed with the popular solvents being used in the cannabis industry today:

  • Materials of Construction- Stainless steel materials for food/consumed oil applications
  • Electrical for Flammable Solvents – Class 1, Division 1 (explosion proof) electrical components for compressed flammable gasses, Class 1, Division 2 for ethanol/alcohol
  • Electrical, Non Flammable Solvents – NEMA 4x wash down electrical enclosures
  • Pressure Rating – usually 300 psi for hydrocarbons, 2000 or 5000psi for CO2.
  • Overpressure Protection – non-isolable relief valves set to 110% of maximum allowable working pressure
  • Food grade – welds in contact with extracted material should be ground flush and polished
  • Accessibility for Cleaning – vessels and piping should be accessible from both ends to allow proper cleaning
  • Storage tanks – should be stainless steel to prevent corrosion

Facility – In addition to the equipment considerations, the facility must also be appropriate for the extraction solvent.

  • Compressed Flammable Gasses – Class 1, Division 1 facility. This includes electrical fixtures, and also monitoring and evacuation equipment in the event there is a release of flammable gas into the area around the equipment.
  • Ethanol/Alcohol – vent hood or equivalent walk in vent area
  • CO2 – asphyxiation hazard. Monitoring and audible alarm to warn of leaks.
  • CO2 – Generally Regarded as Safe (GRAS) by the FDA for consumption
  • Compressed gas – GRAS for use as a propellant, states differ on safe residual solvent levels
  • Ethanol – GRAS for food products, states differ on safe residual solvent levels

So the answer to the question about safety really doesn’t have anything to do with the solvent, rather the equipment chosen and the facility where the extraction is performed determine safety. The solvents commonly used in extractions today all have pros and cons, and all can be operated safely as long as proper guidelines and regulations are followed.

I addressed the safety question in the first part of the answer, in the second part I’ll address the efficiency question: What is the most effective way to extract CBD-rich oil?

A major problem facing the cannabis industry today is a lack of commonly accepted standards – as evidenced by the question referring to “CBD-rich”. Does “CBD-rich” mean 40% CBD? 99% CBD? And CBD in what form, CBD, CBD-A or some combination? There are groups that are working towards creating standards, such as FOCUS and ASTM, but they have not been widely accepted yet. Without standards, quality also becomes difficult to determine because the only standard is personal subjectivity.

That being said, there are some generalizations about extraction methods that can be made. Keep in mind – every extraction method has benefits and drawbacks. Each method will shine in certain applications, and perform poorly in other. No method is great at everything.

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.